Use; User/Installer Panel Functions - Baxi SILA RCV 300 Instrucciones De Instalación, Funcionamiento Y Mantenimiento

ENGLISH

Use

When switched on, during the first 2 minutes of operation, the appliance re-positions the bypass valve.
The engines then restart at the previously set speed.
Note: this system behaviour is normal and should not be considered a fault.
The product provides for continuous type operation.
The device is controlled by means of a special control panel. Its functions are described below. It is possible to pair use
with a Baxi pre-heater. This device shall be installed by an installer. The minimum distance of the pre-heater from the device
is 500 mm.

User/installer panel functions

12 12
5
6
The panel allows the appliance to operate in the user mode and in the installer mode (see below)
24
2
holid holida a y y
User
1 Holiday mode
2 Minimum speed
3 Medium speed
4 Maximum speed
5 Bypass LED
6
Alarm LED
3
min min med med max max
LED
Installer
Not used
- If on with 6 LED Vmin supply mode
- If on with 5 LED Vmin exhaust
Not used
- If on with 6 LED Vmax supply mode
- If on with 5 LED Vmax exhaust mode
see LED 2 and 4
see LED 2 and 4
4
A
B
C