Overview And Use - HQ-Power PA5N Manual Del Usuario

Features
4.
• light and smart design for easy carrying
• low noise and excellent performance
• ideal for schools, factories, meetings, guides and street vendors
• headset with dynamic condense microphone
• spare microphone: PA5N/SP1
5.

Overview and use

Refer to the illustration on page 2 of this manual.
6. Operation
• Insert batteries into the PA system (see §7).
• Plug the headphone connector into the microphone input [A].
• Switch on the PA system by turning on the on/off – volume control
knob [D]. The power/charge LED [C] lights up green.
• Make sure the speaker [E] is not covered and speak into the
microphone to broadcast a message. Turn the on/off – volume
control knob [D] to adjust the volume.
• The PA system can be attached around the waist for easy hands free
operation.
• The device contains a battery charging mechanism. When using
rechargeable batteries, they can be charged by plugging an AC/DC
adaptor (not included, 12VDC/200mA, tip +) into the 12VDC
charger input [B]. Do not attempt to recharge non-rechargeable
batteries or damage will result to both batteries and PA system.
When charging, the power/charge LED [C] lights up red.
7. Batteries
•
Before replacing or inserting batteries, make sure the PA system is
off.
•
Open the battery cover [F] at the back.
• Insert 8 new identical 1.5V AA batteries (LR6C, not included)
following the polarity markings inside the battery compartment.
Always replace all batteries simultaneously.
• Close the battery compartment.
Malfunction may occur if the power is on when the
battery is replaced. Dispose of batteries in
accordance with local regulations.
Keep batteries away from children.
23/01/2009
PA5N
4
©2008 Velleman Components nv
®