Initiate Network Connection - Symbol LRT 3840 Guía Rápida

Initiate Network Connection

Cold Boot the Terminal
Note: Verify that terminal is OFF before cold booting.
1. Press and hold A+B+D.
2. Press PWR.
3. Release A+B+D.
The terminal boots DR-DOS and loads the TCP/IP drivers while
displaying a series of boot messages.
Enter New Net ID in Configurator
On first boot (out of the box), the terminal automatically brings
up the Configurator screen for entering a new Net ID:
CONFIGURATOR 1.XX
View config params
Net Id
Subnet Mask
Default Router
Terminal IP Address
Exit
-
, Clear, Enter
9