Cleaning And Maintenance - KIKKA BOO Dessine-moi Instrucciones De Uso

Ocultar thumbs Ver también para Dessine-moi:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
EN
WARNING! Instructions for safe use.
KEEP FOR FUTURE USE -READ CAREFULLY
• Complies with safety requrements.
• Complies with standard EN 716-1:21:08+A1.2013
TO SET UP THE BASSINET/
Assembly of the extra level
Unfold the cot but do not install the mattress in it.
1. Zip the bassinet on the perimeter of the cot.
2. Make sure the slider is in the safety ring. Fold back the Velcro tabs to make the slider inaccessible.
3. Put the support bars in place.
4. Put the mattress and the Velcro stripes in place.
WARNING!
• Warning! Never place the cot close to exposed flames or other sources of heat such as electrical heating devices, gas heating
devices etc.
• Warning! Never use the cot if any part is broken, damaged or missing. and use only the spare parts approved by the manu-
facturer.
• Warning! Make sure there is nothing in the cot or near it that could be caught by the child's feet or present a choking or
strangling hazard, such as string, curtain cords etc.
• Warning! Use only the mattress supplied with the cot.
• Warning! Do not use more than one mattress in the cot.
• Warning! li the child is left unattended in the playpen. always ensure that the opening tin the side is closed.
• To prevent falls, the cot may no longer be used when the child is able to get out of it on their own.
• Make sure that all the assembly systems are adequately tight. Check them from time to time and tighten if required.
• Make sure that the product is placed on a stable surface.
• The cot is only ready for use after the locking mechanisms have been engaged correctly. and have been found to be ad-
equately engaged.
• The lowest position is the safest, and the mattress base must always be used in the lowest position when the baby is old
enough to sit up.

CLEANING AND MAINTENANCE

• Keep the product in a dry place.
• It is recommended that all moving parts are kept clean, and if necessary, lubricated with a silicon spray.
• We advise cleaning the metallic parts every 2 weeks if necessary.
• Clean the cover with a damp cloth and a neutral detergent. Do not immerse it in water.
• Protect the product against atmospheric factors, water, rain or snow.
• Extensive and continuous exposure to the sun can alter the colours in many materials.
WARNING!
• To avoid the risk of suffocation, keep all plastic bags and packaging out of reach of babies and young children.

Publicidad

Tabla de contenido
loading

Tabla de contenido