Waterproof Casing; Power On, Record A Video, Power Off - Toshiba CAMILEO X-SPORTS Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 127
Remote LED status
Blinking Red + Blue (alternatively)
Blinking Red continuously
Blinking Blue continuously
Blinking Blue once (1 sec.)
Blinking White once
Blinking Green
Stay solid Green

Waterproof Casing

NOTE
Please be aware that the camcorder itself is not waterproof at all. It is only waterproof
inside the waterproof casing.
How to put the camera into the waterproof casing:
1. Slide the open button and lift up the latch. Open the waterproof casing door.
2. Put the camera into the waterproof casing.
3. Close the waterproof casing door and bring the latch into position to hold
the door.
4. Lift down the latch to lock the door.
To take out the camera from the waterproof casing:
1. Slide the open button and lift up the latch.
2. Open the door.
3. Take out the camera.

Power ON, Record a Video, Power OFF

1. Press and hold the Power button for 2 seconds to start up the camera.
User's Manual
Operation
Simultaneous Video & Photo Mode
Record a Video/ Simultaneous Video
& Photo
Taking Photos in Timelapse
Taking a single Photo/ Continuous
Photo/ Photo Burst
Camera received operating signal
from Remote
Remote is charging
Remote is fully charged
CAMILEO X-SPORTS
EN-13

Publicidad

Tabla de contenido
loading

Tabla de contenido