Minimum System Requirement - Zipy go! Beating Manual De Usuario

2. Pressthe key to start the sensor. Do not mover your thumb during measurement.
3. Whentheheartbeatmeasurementhascompleted,theheart iconwillstop blinking.
4. Press the key to save the heart beat measurement.
Or press the
Note:
Repeat from step 1 of "Taking your Heart Beat Rate" if the error massage " Improper
placement of thumb. Reapply thumb gently" shows up. The error massge shows up
when:
1. Pressed on the sensor too hard.
2. Not covering the lens entirely with your thumb.
3. Moved your thumb away from the sensor during the measurement process.

Minimum System Requirement

You can connect the device to PC via the provided USB2.0 cable for Charging and
File Transfer purposes. Your PC system must meet the following minimum requirement:
- Only supports Windows 2000/ Windows XP/ Windows Vista. Other systems are
not supported.
- CD-ROM drive
- USB 1.1 port or above (USB 2.0 is recommended)
Charging go! Beating
go! Beating device comes with a
re-chargeable battery. It will be charged
automatically once connected to a PC
via the supplied USB cable.
Note:
1. Charge the device for at least 4 hours
before using it for the first time.
2. If the device is connected to PC via a
USB hub, the USB hub must be self
-powered in order to charge
3. File transferring during charging may
prolong the charging time.
key to go back to the main menu without saving the measurement.
manual English
go! Beating
7