Backup Power; Name Tags; Remote Sensors - Oregon +ECO Clima Control RMR500ES Manual Del Usuario

• The duration of the rechargeable battery's charging or
operating time is determined by either the intensity of
sunlight or the positioning of the solar panel towards
the sun.

BACkUP POWER

CR2032 batteries
In the case when the rechargeable battery is flat or nearly
flat, the 2 pieces of CR2032 batteries can act as backup
power supply for the main unit.
. Remove the battery compartment.
2. Insert the batteries, matching the polarities.
3. Press RESET after each battery change.
Outdoor temperature/
humidity area (THGN500)
Main unit environment area
Remote sensor area
(THGR22N)
Clock and calendar area
(or optional sensors area)
Power adaptor (not included)
The power adaptor can also be used for charging the
rechargeable battery. When connected to the main unit,
will be displayed.

NAME TAGS

Name tags can be inserted in the main unit as in Fig. .
There are 10 name tags provided in this package, with 7
blank tags and 3 tags printed as "MAIN UNIT", "TIME" and
"CALENDAR". You can write in the blank tags the name of
the location where THGR22N and other optional sensors
are installed.
NOTE
"TIME" tags will be replaced.
2 x CR2032

REMOTE SENSORS

This product can work with up to 4 sensors at any one time
to capture temperature and relative humidity readings in
various locations.
5
LOCATION
Outdoor sensor battery low
CR2032 batteries low
Remote sensor batteries
low
Optional sensors batteries
low
If optional sensors are installed, "CALENDAR" and
MEANING