brennenstuhl SH 4000 Instrucciones De Servicio página 8

Mounting instructions
8
1.) Drill two holes (6 mm diameter) in the
wall, 120 mm apart.
2.) Remove the two screws in the base of
the unit and separate the two parts of the
housing.
3.) Secure the rear panel of the housing to
the wall with the screws supplied.
4.) Now stick your house number or letters to
the window in the housing (first, detach
the edges from the chosen numbers/let-
ters on all four sides).
5.) The numbers or letters must now be posi-
tioned in accordance with the markings
on the pull-off foil.
6.) With the house number or letters in
position, place the foil in the centre of the
window, taking care to ensure that it lies
flat.