Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Changing of the shining means:
LEDs (Light Emitting Diode) are characterised by small current consumption and a very long
durability (approx. 10,000 operation hours) and usually do not have to be changed therefore.
The LED shining means are installed in 2 prefabricated profiles.
Nevertheless if a change is necessary in exceptional cases, then each of the 2 LED borders
can be exchanged individually.
Purchase of the LED shining means exclusive from OLYMP.
Switch off power supply on customer's fuse box by switching off the automatic cut-out.
>
Changing of the shining means at light cardridge (C):
> Loosen 3 chip board screws at the light cardridge (illustr. 3)
> Replace the light cardridge compl. with screen from the corpus (illustr. 4)
> Plug off patch cord from the LED border. Replace LED border (Velcro fastener).
4.
Environmental protection
For the disposal of the product public regulations can contain special regulations regarding the
disposal. Please consider these regulations.
5.
Technical Data:
Power supply:
power input:
Safety class:
EC-Declaration
of Conformity:
Shining means „Basic":
(white light)
Shining means „Edition": Light cardridge front:
(color light)
Plug:
Senso smart BDA - GB
GB
220-240 V / 50-60 Hz
40 W
2
In the sense of the EEC guideline electrical operational funds for
use within certain voltage limits 93/97/EEC (low-voltage guideline);
acc. to Article 10 Paragraph 2 of the Directive 89/336/EEC
(EMC-Directive)
Light cardridge front:
Light cardridge side:
Light cardridge side:
light emitting diodes class I
EN 60825-1:1994+A11:1996+A2:2001
(Purchase of the LED profiles exclusive from OLYMP)
Europlug
1 prefabricated profile with LED
1 prefabricated profile with LED
1 prefabricated profile with LED
1 prefabricated profile with LED
Publicidad
