Westfalia 342 094 Instrucciones De Montaje página 41

75. Screw on the ball tow bar along with the socket holder as follows (see figure 1):
Point (D) : Hexagon screw, M12x75 (7); towing hitch (2); ball tow bar (1); towing hitch (2); socket holder
(5); washer, 13 (Æ24; 2,5 mm thick)(10); hexagon nut, M12 (11)
Point (E) : Hexagon screw, M12x75 (7); towing hitch (2); ball tow bar (1); towing hitch (2); washer, 13
(Æ24; 2,5 mm thick)(10); hexagon nut, M12 (11)
The socket holder can be attached either to point (D) or point (E).
76. Tighten the screw connections (D) and (E).
77. Mount the electrical kit according to the enclosed assembly instructions and screw the socket onto the socket
holder (5).
Accessories
To be ordered separately – not included in the towing hitch set !
Electrical kit for Jeep Cherokee all models from 10/01:
Vehicle-specific wiring, 13-pin, 12 Volt
Order no.: 5046a
The enclosed information "Important notes on towing vehicles" must
be given and explained to the customer along with the assembly and
operating manual.
342094691101 – 15/03
M 12
With acoustical blink control
(8.8) : 85 Nm torque
0840 B , 28.11.2001 , Σελίδα 41