Samsung FlexDry DV 60M9900 Serie Manual Del Usuario página 44

Operations
06 Temp.
07 Time
08 Wrinkle Prevent
09 Eco Dry
10 Mixed Load Bell
44 English
FlexDry_DM9900M-DC68-03381F_EN.indd 44
Press Temp. to change the temperature of the current cycle.
High: For sturdy cottons or those labeled Tumble Dry.
Medium: For permanent press, synthetics, lightweight cottons, or
items labeled Tumble Dry Medium.
Med Low: For heat lower than Medium. Use to dry synthetic or
washable knit fabrics.
Low: For heat sensitive items labeled Tumble Dry Low or Tumble
Dry Warm.
Extra Low: Provides the lowest heated drying temperature
possible.
Press Time to select a drying time for the selected cycle. This is
available only with TIME DRY, AIR FLUFF, and WRINKLE AWAY.
This button is not available for Sensor Dry cycles because exact
drying times are determined by fluctuating humidity levels.
Wrinkle Prevent provides approximately 180 minutes of
intermittent tumbling in unheated air at the end of the cycle to
reduce wrinkling. Press Wrinkle Prevent to activate this feature.
The load is dry and can be removed at any time during the
Wrinkle Prevent cycle.
This function is available with NORMAL and TIME DRY.
With the Eco Dry activated, drying takes a longer time but power
consumption is reduced.
The drying time can be extended by up to 3 times normal
depending on the temperature and load. The Eco Dry function is
enabled by default.
The Mixed Load Bell notifies you when the average dry level in
a load is damp dry (80 % dried). This lets you take items that you
don't want fully dried or that dry quickly out of the dryer early
while letting others continue to dry.
You can select this option in all Sensor Dry cycles except for
ACTIVE WEAR, and STEAM SANITIZE. Available dry levels are
Normal, More, and Very.
2017-01-24 1:21:46