Trouble-Shooting - Preval vFan Manual De Piezas E Instrucciones

The vfan PorTable airbruSh SySTem
tRouble sHootInG
Problem
Paint is not coming
out of the vFan
Airbrush consistently
or not at all.
Bubbles are going
through the straw
into the bottle.
There is no pressure
coming out of the
vFan Airbrush.
When I spray paint,
the paint is coming
out splattered or
crooked.
how To Solve
1) Tip may be clogged. Take the head assembly apart
and spray it with 150 Feet of ENERGY to clean it. If
that doesn't work, clean with Q-tips
2) The diptube is clogged. Take strainer off of diptube
and clean; spray 150 Feet of ENERGY through the
diptube or replace the diptube.
3) Clean the airbrush as it may be clogged.
4) Check to see if the needle or tip is damaged.
1) Make sure head assembly is tightened with wrench.
2) Make sure "O" rings are in place.
3) Use wax or chapstick on tip threads to seal better.
4) Make sure needle assembly matches with head.
Example: Size 2 head needs to be with size 2 needle.
5) Airbrush needs to be cleaned.
1) Check to make sure the regulator valve is sealed
correctly and control knob turned clockwise.
2) Check to make sure the trigger is seated correctly.
3) Make sure hose has no kinks in it.
4) Disassemble the airbrush, clean it and reassemble,
making sure all parts are in the proper place.
5) Make sure 150 Feet of ENERGy is not empty.
1) Check the tip of the needle with a cotton ball to
make sure the tip is not bent. The tip is fragile and
can bend easily.
2) Check tip with cotton ball to make sure the tip is
not cracked.
3) Clean entire airbrush thoroughly with thinner and
dry with 150 Feet of ENERGY. If there is paint that
can't be removed, you must soak the parts
separately in solvents.
If you still have questions, please email info@preval.com.
and thinner.
®
Page 13