U ser's Manual
E N
Getting Started
Battery
Use only original manufacturer-approved batteries, and recharge your battery only
original chargers designed for this purpose. Using an unapproved battery or charger
may present a risk of fire, leakage, explosion or other emergency.
Inserting and removing the SIM card
Turn off the phone and remove the battery and unplug the charger. Insert the SIM
card into the SIM slot.
Turn on / off
Press and hold the key to disconnect to turn on / off the unit. Automatic SIM card will
be tested after power. If you do not have a SIM card, the device will prompt you to
insert two SIM cards, and then the screen displays the message: "Enter your
password", if set, enter PIN "- if the SIM card PIN code has been set.
Phone Settings
To change your settings, press the MENU button, press the directional buttons, and
select Settings, then press OK.
Date and time
Press the Up and down to your phone settings, select the time and date, and then set
the time / date. Buttons to set the date and time and click OK.
Note: After removing the battery from the phone or if the battery is exhausted, you
may need to set the date and time again.
Planning On / Off
Set the time when the phone is automatically switched on or off.
Language
Select the display language for your mobile phone.
Preferred Input Method
Set the default input method to the phone according to your preferences.
Display
Select wallpaper, screensaver, animation when switching, animation during the
shutdown, displaying the date and time, and / or number of the owner.
Phone Menu
Phonebook
Allows you to store information, such as name, telephone numbers. Phone numbers
can be stored on your device or SIM card. For the SIM card number of records
depends on the capacity of the card. To browse the phonebook, press the right key in
standby mode.
Messages
Access to the menu and the list of messages received / sent SMS messages.
Call
4