Control Elements; Installing The Coffee Maker - Dometic WAECO PerfectCoffee MC 08 Instrucciones De Uso

_MC08.book Seite 17 Dienstag, 27. September 2011 11:22 11
PerfectCoffee MC-08
5.1

Control elements

The coffee maker has the following control elements:
No. in
fig. 2, page 2
1
2
6

Installing the coffee maker

WARNING!
!
 When selecting the location for installing the appliance, ensure
that passengers cannot be injured under any circumstances.
When installing the appliance, make sure the airbag function is
not impaired.
 Do not attach the appliance in an area where passengers could
knock their heads against it. Make sure there is sufficient space
for the drill head to emerge when drilling.
NOTICE!
A
Only install the appliance on surfaces which are heat-resistant and
damp-proof.
You can mount the coffee maker on a wall using the wall bracket (fig. 3,
page 3) or you can use the base plate for a flat surface (fig. 5, page 3).
Mounting on the wall
➤ Mount the wall bracket with two screws, washers and M 4 nuts on a suit-
able wall (fig. 3 A, page 3).
➤ Insert the appliance onto the wall bracket (fig. 3 B, page 3).
The appliance must click into the wall bracket.
EN
Description
Switch with control lamp
The control lamp lights up red while the coffee is brewing.
Filling level display
Installing the coffee maker
17