NEO NEXUS SWITCH 24 Manual De Usuario página 6

Rename Device
Enter into the main menu by press MENU, then press-
ing the UP and DOWN to choose the Rename Device
option and then press the ENTER to confirm your se-
lection. Now you can rename the device by pressing
UP and DOWN now. Confirm you change and move
to next option by press the MENU.
Set IP Address
Enter into the main menu by press MENU, then
pressing the UP and DOWN to choose the Set IP
Address option and then press the ENTER to con-
firm your selection. Now you can set IP address by
pressing UP and DOWN now. Confirm you change
by press the ENTER.
Please note: Each of the IP address should be
unique.
P. 6
Neo Nexus Switch 24 - English version
Set Net mask
Enter into the main menu by press MENU, then
pressing the UP and DOWN to choose the Set
Netmask option and then press the ENTER to con-
firm your selection. Now you can set Netmask by
pressing UP and DOWN now. Confirm you change
by press the ENTER.
Set DMX port
Enter into the main menu by press MENU, then
pressing the UP and DOWN to choose the Set DMX
port option and then press the ENTER to confirm
your selection. Then you can set the parameter of
the each port by pressing UP /DOWN and ENTER
now.
1-24 DMX output You can enter to any of the DMX
port 1-24 and set as below:
1. Disp Type, adjust the display mode
2. Port Status, DMX port status can be set as IN /
OUT/ DIS;
3. DMX Mode, As the DMX port set as Input sta-
tus, then the Mode only can be set as normal
or backup; As the DMX port set as output