Cleaning And Hygiene - Medela B-Well Manual De Instrucciones

Cleaning and Hygiene
V
After each
• Always unplug the appliance from the mains before cleaning it.
use • Do not clean the appliance when hot.
• Wait 15 minutes after use to allow the Bottle Warmer to cool down.
• Ensure that the plug does not come in contact with water.
• Wipe the inside and outside of the Bottle Warmer with a damp (not wet)
Note: Use water of drinking quality for any described cleaning procedures
Cleaning
After a while in use limescale will build-up around the hotplate of the Bottle
Warmer. This should be removed at regular intervals.
Version 1
Every month
(De-scale) • Mix 100 ml/3.3 oz of water with citric acid* according to manufac-
• DO NOT place a bottle or jar into the Bottle Warmer when cleaning.
• DO NOT put lid (2) on.
• Select breastmilk, room temperature and the volume of 250 ml. After
• After the cleaning process has ended, leave the solution to cool for 30
• Wipe the inside and outside of the Bottle Warmer with a damp (not wet)
Version 2
• Pour 50 ml/1.8 oz of vinegar mixed with 50 ml/1.8 oz of cold water into
• DO NOT place a bottle or jar into the Bottle Warmer when cleaning.
• DO NOT start the warming process.
• Leave liquid in the unit until limescale has dissolved.
• Empty the unit and rinse thoroughly with clear water.
• Wipe the inside and outside of the Bottle Warmer with a damp (not wet)
*Citric acid is available from most drugstores and pharmacies
Note: Do not use anything other than citric acid or vinegar as this may
cloth.
Do not clean with abrasive cleaners
Never place the Bottle Warmer directly under tap water
Never clean the Bottle Warmer in a dishwasher
turer's instructions and pour solution into empty Bottle Warmer.
you have finished your selection, all selected icons turn on and
turns orange. The cleaning process has been started.
minutes before emptying the Bottle Warmer and rinsing with tap water.
cloth only.
the Bottle Warmer.
cloth only.
cause irreparable damage
-Icon
EN 11