Reboot; Configuration; Capacities And Parameters; Connectors - Fermax LYNX Manual De Instalador

- Reboot

This process will reboot the system.

CONFIGURATION

For a successful confi guration of the Lynx Router behind the Internet Router you must
open and redirect the following list of ports in the ISP router:
Protocol
TCP
TCP
UDP
UDP
Note:
- It could be necessary to remove fi rewall rules that it may affect to the IP of the
LYNX router.
- * Relative to the selected port confi guration.

CAPACITIES AND PARAMETERS

20 Paired devices per apartment.
20 Mbps maximum upload bandwidth.
8190 maximum devices connected per router.
Maximum simultaneous calls per router:
- High quality: 5.
- Medium or low quality: 7.
Parameters
Router number
Default IP

CONNECTORS

Description of connectors and connections.
• Serial Port: In the case that you can not access the system by any network interface,
you can access it using the serial port.
• Internet: Network interface to be connected to the ISP router that provides access
to the Internet.
• Lynx: Network interface to access the LYNX network.
• USB1/USB2: The device allows you to mount USB drive for read and write data to
the system.
• PWR: Power supply.
10
LYNX ROUTER
Port
*
68
500
4500
Values
0-119
10.206.0.0
Goal
HTTP server for QR code
Strongswan (VPN)
Internet Key Exchange (IKE)
Transversal NAT