Operation; Weighing Items; Weighing Additional Ingredients (Tare Function); Switching The Scale Off - Silvercrest SKIU 5 A1 Instrucciones De Uso

Operation

Weighing items

1) Press the scales briefl y. The appliance switches on.
2) Place the items to be weighed on the scale.
The weight and the selected unit of measurement are shown on the display 3.
NOTE
If you want to weigh food in a bowl, fi rst place the empty bowl on the scale
and then press the TARE button 4 before fi lling the bowl with the food. This
subtracts the weight of the bowl from the overall weight.
3) If you want to change the unit of measurement, press the UNIT button 2
until the desired unit of measurement is shown on the display 3. You can
choose between the following:
–
–
–
4) If you want to add additional items, proceed as described in the section

"Weighing additional ingredients (tare function)".

If you do not want to add any additional items, read the weight and remove
the food from the scale. The appliance switches off automatically after ap-
proximately 60 seconds.
Weighing additional ingredients (tare function)
You can set the scale back to "0" as often as required in order to weigh ad-
ditional quantities.
1) To do this, press the TARE button 4 once.
The scales indicate a weight of "0" again.
2) Place the additional ingredient on the scale.
The weight of the newly added item is shown on the display 3.
You can repeat this procedure several times. However, never place more than
5 kg on the scale.
Switching the scale off
If you ...
–
–
–
... within 60 seconds, the scale will switch off automatically.
GB │ IE
│
■ 20
Grams (g)
Kilograms (kg)
Pounds:ounces (lb:oz)
do not press any button,
do not place any item on the scale,
or do not remove any item from the scale ...
SKIU 5 A1