How To Use; How To Assemble - Munchkin Swing Manual Del Propietário

HOW TO ASSEMBLE

1. Slide the seat's frame onto the base support post.
IMPORTANT: The D-shaped anchor inside the seat's frame must fit into the D-shaped
port in the support post. Always ensure that the seat is locked securely onto the base
before use.
2. Place the reversible body pad onto
the seat, then thread the harness
strap through the bottom slot of
the pad.
3. Pull the hook-and-loop strap at the
top of the body pad through the
ring. Fold the strap to secure its
position.
4. Place the headrest onto the seat,
then pull the hook-and-loop strap
through the ring. Fold to secure.

How to Use

7