amora venus Manual De Instrucciones página 6

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
Operation advice:
■ Place the device on a solid, level and moisture-resistant surface. Do
not place the device directly underneath a shelf or a wall unit, or near
any material that could be affected by water vapour. When operating the
device make sure the water vapour does not flow in the direction of an
electrical socket, or near any electrical item which could be affected by
water vapour, such as telephone, televisions etc.
■ Ensure that the air inlet is free from obstruction.
■ When using with fragrance or essential oils, ensure the device is not
near any painted, plastic or polished surfaces which could be adversely
affected by your oils.
■ Do not allow fragrance or essential oils to come into contact with the
outer body of the device. Should this happen, wipe clean immediately to
prevent any damage to the exterior.
■ Use room-temperature water only. Never use water which is over
40°c. For best results, use distilled or demineralised water.
■ Never attempt to fill the device when it is operating, and always unplug
the device from the USB port when filling. Ensure you wipe clean any
spillages before operating the device. Keep the device level at all times
when there is water in the reservoir in order to avoid spillage.
■ Do not operate the device without water.
■ If the room temperature is very low, the mist produced may settle
around the device and cause the surrounding area to become damp.
■ Should the unit be accidentally knocked or tipped over during use or
with water in the reservoir, unplug the unit from the USB Port. Pour out
any remaining water (ensuring that you pour at the opposite side to the
Air Outlet - see diagram and names of parts to recognise this), and follow
cleaning instructions provided in this leaflet. Allow the device to dry for at
least 24 hours before the next use.
Notes:
The volume of mist produced will vary, but this is perfectly normal and
should not be considered as a fault. Environmental factors which can
influence the amount of mist produced include temperature, humidity, air
flow or water type.

Publicidad

Tabla de contenido
loading

Tabla de contenido