Electrical Installation; Water Installation - DURAVIT SensoWash Starck Instrucciones De Montaje

Electrical installation

Power supply
#610... .. 2 .. ....
Power supply
#610... .. 1 .. ....
Max. rated power
Circuit breaker
RCCB
Protection type
Protection class
Position of electrical / water connection with
wall-mounted WC
IG ½"
265-300 mm
10 ⅜"-11 ¾"
Pre-Installation
> Lay a permanent power supply line:
Connect a separate upstream circuit breaker
Connect an upstream residual current device (RCD)
separating all poles
DANGER!
Risk of fatal electric shock.
> Do not use any unearthed extension cables when
connecting the Shower WC.
20
Connecting the Shower WC (Diagram 20)
NOTE! Avoiding property damage.
> Only connect the Shower WC to a socket with the
stipulated connected loads.
> Ensure that the power plug is accessible to users
after the installation.
220 – 240 V ~ 50/60 Hz
100 – 120 V ~ 50/60 Hz
1.65 kW
I = 16 A
N
I = 30 mA
N
IP X4
1
..
285-300 mm
11 ¼"-11 ¾"

Water installation

Cold water DN 15(1/2")
Water pressure 0.07 - 0.75 MPa
(0.7 - 7.5 bar)
Water hardness max. 2,4 mmol/l
NOTE!
> Install a water water softener with water
hardness ≥ 2,. mmol/l (≥ 14° dH and/or
24° fH).
Position of electrical / water connection with
flor-standing WC
IG ½"
250-300 mm
9⅞"-11¾"
Pre-Installation
> Install the water connection and water outlet in the
specified areas.
DANGER!
Health risk and potential product damage.
> Supply the WC with cold drinking water from the main
water system.
> Do not connect any waste water, grey water, industrial
water, sea water or other untreated or semi-treated
water.
Connecting water to a wall-mounted WC
10
(Diagram 10)
NOTE! Avoiding any malfunctions!
> Only use the water supply hoses provided.
Connecting water to a free-standing WC
17
(Diagram 17)
NOTE! Avoiding any malfunctions!
> Only use the water supply hoses provided.
..
250-300 mm
9 ⅞"-11¾"
7
SensoWash Starck_MAL_53738/14.05.3