Velleman VTHD02 Manual Del Usuario página 3

VTHD02 – ELECTRIC DRILL WITH 60 ACCESSORIES
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the VTHD02! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
2. Contents
• 1 x electric drill
• 1 x 230VAC power supply
• 10 x grinder stone
• 20 x diamond bit
• 2 x connective post
• 1 x nylon brush
• 1 x brass brush
• 1 x steel brush
• 5 x cutting disc
• 4 x polishing wheel
• 6 x sanding band
• 4 x drill bit (1, 2.2, 2.9 and 3.1mm)
• 4 x collet
• 1 x engraving bit
• 1 x wet stone
3. Description
1. collet nut
2. spindle lock button
3. switch
4. power cord
4. General Guidelines & Safety Instructions
• Damage caused by disregarding certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for the ensuing defects or problems.
• Familiarize yourself with the functions of the device before actually using it. Do not permit operation by unqualified
people. Any damage that may occur will probably be due to unprofessional use of the device.
• Only use the device for its intended purpose.
• Do not press the spindle lock when the device is in use.
• Do not touch the bit during use.
• Do not use the device if the housing is too hot.
VTHD02 3 VELLEMAN