Milltronics POINTEK VLS 200 Manual De Instrucciones página 5

Environmental
Location
• indoor/ outdoor
Ingress Protection
• Type 4 / NEMA 4 / IP65
Ambient Temperature
• -25 to 60°C (-13 to 176°F)
Humidity
• 0 to 100%
Altitude
• max. 2000 m
Installation Category
• III
Pollution degree
• 2
Process
Temperature
• -20 to 80°C (-4 to 176°F)
• temperature code: T4A (CSA relevant)
• maximum surface temperature of the housing (Category 2D): 90ºC (194ºF) [ATEX
relevant]
Pressure
• max 10 bar (145 psi)
Note:
Pressure information for hazardous areas:
The device construction allows over-pressure up to 10 bar. This pressure is allowed
for test purposes. The ATEX approval applies to over-pressure between -0.2 and 0.1
bar in hazardous areas. For higher or lower pressures, the approval is not valid.
7ML19981FT61 Pointek VLS 200 – INSTRUCTION MANUAL Page 3