Power Dynamics PV220BT Manual De Instrucciones página 5

STEPS FOR CONNECTING WITH BT DEVICE
Once paired you can play music from your BT-device. You can also use the control buttons on the unit to
select the tracks from your BT-device.
1. Press MODE button to choose BT mode, display BT on the screen.
2. Search on your BT device for the name "PV260BT".
3. Select the "PV260BT" and wait for the device to pair.
4. The PV260BT" will emit a noise confirming that the devices have successfully paired
6. VOLUME 1 CONTROL KNOB
Turn this knob to adjust the volume of Channel 1.
7. VOLUME 2 CONTROL KNOB
Turn this knob to adjust the volume of Channel 2.
8. ECHO EFFECT CONTROL KNOB
Turn this knob to adjust the microphone echo level.
9. MICROPHONE 2 VOLUME KNOB
Turn this knob to adjust the volume of MIC2
10. MICROPHONE 1 VOLUME KNOB
Turn this knob to adjust the volume of MIC1.
11. TALKOVER
Press this button to lower the music when use the microphone 1 input.
12. MICROPHONE INPUT 1 JACK
MIC 1 Input Jack for connecting an unbalanced low impedance microphone with 6.35mm (1/4") jack connector.
13. MICROPHONE INPUT 2 JACK
MIC 2 Input Jack for connecting an unbalanced low impedance microphone with 6.35mm (1/4") jack connector.
14. AUX INPUT
Connects to a MP3 player or phone with 3.5mm Jack.
15. TREBLE
Turn this knob to adjust the high frequencies of Channel 1/2/3/4.
16. BASS
Turn this knob to adjust the low frequencies of Channel 1/2/3/4.
17. MUSIC VOLUME CONTROL KNOB
Turn this knob to adjust the master music volume.
18. INPUT SELECTOR
Turn this button to choose the favorable input.
19. FM ANTENNA CONNECTOR
Connect for FM antennas.
20. AUDIO INPUT RCA CONNECTOR
Connect the audio output jacks of DVD/CD, to these jacks.
21. LINE OUTPUT
Connect the audio/Subwoofer input RCA jacks of other devices, to these RCA jacks.
22. SPEAKER OUTPUT
There are 6 groups of speaker output.
23. BT ANTENNA
Aim the antenna at an angle of 45 degrees when using BT-audio.
5