Velleman WT8093 Manual Del Usuario página 5

•
A touch can also switch display mode. To activate this function, set
the mode lock switch [I] to the ON-position. Multiple touches will
switch display in the following order:
Main clock & date setting
•
When necessary, press the mode button [D] repeatedly until the time
icon [1] is displayed.
•
Press the up [F] or down [G] button to switch between 12 and 24h time
format.
•
Press and hold the set button [E] for ±2s, the hour starts flashing.
•
Press the up [F] or down [G] button to set the hour.
•
Press the set button [E], the minutes start flashing. Modify with the up
[F] or down [G] button.
•
Press the set button [E] again to save the time.
Alarm setting
•
Press the mode button [D] repeatedly until the alarm icon [2] is
displayed.
•
Press the set button [E], the hour starts flashing. Modify with the up [F]
or down [G] button.
•
Press the set button [E], the minutes start flashing. Modify with the up
[F] or down [G] button.
•
Press the set button [E] again to save the alarm time.
•
To activate/deactivate the alarm press the mode button [D]
repeatedly until the alarm icon [2] is displayed.
•
Press the up [F] or down [G] button to enable the alarm, indicated by
the alarm-on icon [4].
•
When the set alarm time is reached, the alarm will sound for 1 minute.
Switch it off by pressing any button [D, E, F, G] or touching the border
[A] when touch control is enabled.
Date setting
•
Press the mode button [D] repeatedly until the date is displayed.
•
Press and hold the set button [E] for ±2s, the year start flashing. Modify
using the up [F] or down [G] button.
•
Press the set button [E], the month starts flashing. Modify with the up
[F] or down [G] button.
•
Press the set button [E] again, the day starts flashing. Modify with the
up [F] or down [G] button.
•
Press the set button [E] again to save the date.
06/01/2009
time – temperature – date – timer – alarm.
WT8093
5 ©Velleman Components nv
®