Velleman VTSSDN Manual Del Usuario página 9

FIG. 13 FIG. 14
FIG. 15 FIG. 16
b. IN-LINE FILTERS
1. Unscrew the in-line filters and pull the two pieces apart (fig. 17 & 18).
FIG. 17
2. Replace the fillings of both filters as shown in fig. 18.
FIG. 18
fillings
TO STATION TO IRON
BITDEST2
Note: Use a desoldering tip with a Ø of 1.2mm (BITDEST2).
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
VTSSDN_v2 9 VELLEMAN