Description; Assembly - GGP ITALY BLV 48 Li Manual De Instrucciones

Keep bystanders away
Keep all bystanders, especially
children and pets, at least
15m from the operating area.
Impeller Blades
Rotating impeller blades can
cause severe injury.
Do not touch the fan when
operating this unit.
Wet conditions alert
Do not expose to rain or damp conditions.
The following signal words and meanings
are intended to explain the levels of
risk associated with this product.
ndicates an imminently
DANGER: I
hazardous situation, which, if not
avoided, will result in death
or serious injury.
WARNING: Indicates a potentially
hazardous situation, which, if not avoided,
could result in death or serious injury
CAUTION! Indicates a potentially
hazardous situation, which, if not avoided,
may result in minor or moderate injury.
CAUTION: (Without Safety Alert
Symbol) Indicates a situation that may
result in property damage.

3. DESCRIPTION

1. Variable switch
2. Low/high button
3. ON/OFF button
4. Auxiliary handle
5. Mulch/vacuum gate
6. Lock button
7. Blower tube
8. Mulcher tube
9. Bag
10. Notched area
11. Air outlet
12. Slot
13. Tab
14. Strap
15. Identification plate
15.1) EC Conformity marking
15.2) Name and address of the manufacturer
15.3) Guaranteed sound power level
15.4) Machine model
15.5) Serial number
15.6) Year of manufacture
15.7) Power supply frequency and voltage
15.8) Motor power
15.9) Article Code
15.10) Manufacturing country
As soon as you have purchased the
machine, do not forget to write the
identification numbers (S/n) in the spaces
on the last page of the manual.
The example of the Declaration of Conformity is
provided on the penultimate page of the manual.

4. ASSEMBLY

UNPACKING
• Carefully remove the product and
any accessories from the box.
• Inspect the product carefully to
make sure no breakage or damage
occurred during shipping.
• Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the product.
• If any parts are damaged or missing, please
call your Tools service centre for assistance.
The blower vac is supplied with some components
not assembled. To assemble these, proceed as
follows:
ASSEMBLE AS A MULCHER
See Figure 2.
• Slide the front and rear mulcher tubes
together until locked. (See fig 2)
• Pull the lock button forward to disengage
the gate.Hold the gate open. (See fig 2.1)
• Insert the "wedged" end clip of the mulcher
tube into the rear clip. (See fig 2.2). Push the
"hooked" end clip of the mulcher tube into the
front clip. (See fig 2.3). Press the lock button
back to engage the mulcher tube. (See fig 2.4)
• To remove mulcher tubes,
follow the steps(3) (2) (1).
• Insert the bag adaptor into the blower
outlet. Lock the bag adaptor with the lock
button. To remove the bag, simply press
lock button and remove bag. (see Fig.4).
NOTE It may be necessary to remove
the blower tube or mulcher tubes to
clear a blocked tube or impeller.
To prevent accidental starting that
could cause serious personal injury,
always remove the battery pack from
the blower when assembling parts.
4