Troubleshooting - GGP ITALY BLV 48 Li Manual De Instrucciones

Soplador / aspirador a batería
Ocultar thumbs Ver también para BLV 48 Li:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 85

7. TROUBLESHOOTING

PROBLEM
Unit will not blow or mulcher.
Air Velocity
Weight (Battery Pack
not included)
Unit will not start.
POSSIBLE CAUSE
1. Bag full
2. Blocked tube
3. Blocked impeller
4. Dirty bag
5. Torn bag
6. Bag unzipped
7. Battery is not secure.
8. Battery is not charged.
1. Battery is not secure.
2. Battery is not charged.
3. Power/speed switch is in the
OFF position.
4. Vac tubes are not correctly
installed.
5. Intake gate/cover is not
closed.
8
SOLUTION
1. Empty the bag.
2. Clear the blockage.
3. Clear the blockage
4. Clean the bag.
5. Replace the bag.
6. Zip up the bag.
7. To secure the battery pack,
make sure the latches on the
top of the battery pack snap into
place.
8. Charge the battery pack
according to the instructions
included with your model.
1. To secure the battery pack,
make sure the latches on the
top of the battery pack snap into
place.
2. Charge the battery pack
according to the instructions
included with your model.
3. Press the on/off switch.
4. Check vac tubes to ensure
that they are allowing the switch
to be engaged when correctly
installed.
5. Ensure that gate/cover is fully
closed and locked.

Publicidad

Tabla de contenido
loading

Tabla de contenido