Daewoo International DTC-310 Guia Del Usuario página 20

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Setting Local Area Code and Long Distance Code
1. In on-hook state, press SET key, then press UP once. LCD displays SET 2 CODE. Press
SET key, LCD displays CODE 0----- and the long distance code "0" flashes.
2. Press UP or DOWN key to set the flashing code from 0 to 9 or -.
3. Press SET key to confirm, follow same steps to finish the rest code setting. Press SET key to
confirm and enter the next item setting.
Adjusting LCD Contrast
1. In on-hook state, press SET key, then press UP twice, LCD displays SET 3 LCD. Press SET
key, LCD displays LCD 08
2. Press UP or DOWN key to adjust the contrast of LCD, total 16 levels can be selected.
3. Press SET key to confirm and enter the next item setting.
Alternatively in on-hook state, press R key to enter LCD contrast setting directly, then
press R key continuously to adjust the LCD contrast.
Setting flash time
1. In on-hook state, press SET key, then press UP three times, LCD displays SET 4 FLASH.
Press SET key, LCD display FLASH 100
2. Press UP or DOWN key to set the flash time, flash time can be set at 1000ms, 600ms, 300ms
or 100ms.
3. Press SET key to confirm and quit.
Setting PABX code
1. In on-hook state, press and hold DEL key for 3 seconds to set PABX code, LCD displays
SET PCODE - and the "-" flashes.
2. Press UP or DOWN key to set PABX code from 0 to 9 and "-".
3. If choose "-", it means no PABX code setting.
4. Press SET key to confirm and quit.
Setting Alarm Clock
1. In on-hook state, press ALARM key once, LCD displays 12-00 AL1,
2. Press UP or DOWN key to select alarm clock ON or OFF, when select ON, LCD displays
"ALM" icon.
3. Press SET key, "12" start to flash.
4. Press UP or DOWN key to set the alarm hour time and press SET key to confirm and enter
alarm minute setting.
5. Press UP or DOWN key to edit alarm minute and press SET key to confirm and go to next
group alarm clock setting.
6. Repeat the above steps to set additional alarms.
NOTE: The first 3 groups alarm clock will be repeated periodically every day while the last 2
groups alarm clock are effected one time.
20

Publicidad

Tabla de contenido
loading

Tabla de contenido