Swann SWIFI-DOORBELL Guia De Inicio Rapido página 4

Before using the Video Doorbell for the first time, charge it for at least two hours with the included USB
charging cable.
1
Open the rubber cover of the micro USB port at the back of the Video Doorbell.
2
Insert the smaller end of the USB charging cable into the micro USB port on the Video Doorbell,
and the larger end into a USB wall charger such as the USB power adapter that came with your
phone.
3
The LED indicator on the front of the Video Doorbell turns solid blue indicating that the Video
Doorbell is charging. When the Video Doorbell is fully charged, the LED indicator will turn off.
4
Actual charging times may vary depending on the USB power supply (DC5V 2.1A or above is
recommended for faster charging) and the remaining battery level. A full charge can take up to six
hours if the Video Doorbell's battery is low.
EN
4
CHARGE THE VIDEO DOORBELL