Air Filters - Linea DOMO DO360A Manual De Instrucciones

· After fully draining the water tank, place the drain plug back on the drain opening.
· Restart the unit, make sure the error code P1 is no longer displayed. When the code doesn't disappear,
try turning off and on the unit a few times. When the error code continues, please contact the after
sales service.
· NOTE : always make sure to install the drain plug, before turning the unit back on.
CLEANING
· Always remove the plug from the socket before cleaning the unit.
· Never use any chemical or abrasive products to clean the unit.
· Never clean the unit with water or any other liquid, this can cause electrocution.
· When the power cord is damaged it must be repaired or replaced by the after sales surface of the
manufacturer or by a qualified person.

Air filters

· The unit contains 2 air filters. Clean the air filters at least every 2 weeks.
This prevents the fan from malfunctioning due to dust in the filter.
· Clean the filters in lukewarm water with a mild detergent. Rinse the
filters thoroughly and let them air dry.
· When the filters are completely dry, you can put them back in the unit.
Airco body
Use a damp, soft cloth and a bit of mild detergent, to clean the outside of the unit. Make sure the unit is
thoroughly dried afterwards.
Storing
Before storing the unit for a longer periode of time, please follow the next steps :
· Drain all the water from the appliance.
· Afterwards turn on the unit in the "fan" mode for half a day. Make sure the unit is placed in a heated
room. This will dry the unit completely and previent the forming of mold.
· Turn off the unit, remove the plug from the socket and remove the batteries from the remote control.
· Clean the filters and place them back in the unit.
· Store the unit in a dry, dark place.
POSSIBLE PROBLEMS AND THEIR SOLUTIONS
The appliance isn't working when pressing the on/off touch.
· The error code P1 is dispayed , drain the water from the airco.
· The room temperature is lower than the selected temperature. Adjust the selected temperature.
The room is not cool enough.
· The windows and doors aren't closed. Make sure all windows and doors are closed.
· There are heat sources in the room. Remove all heat sources if possible.
58
DO360A
1
2