Rear Panel - ION Air CD Pro Guia De Inicio Rapido

2. Disc Tray: Place a CD in this tray in order to listen to it when Air CD Pro is in CD Mode. Use the
Eject button to open the tray when you want to insert a CD. Use the same button to close the
tray before playing the CD.
3. Display: The central area of this screen indicates which audio input mode is currently selected
as well as the status of the corresponding audio source. Additionally, a column of seven icons on
the left side of the screen turn on and off according to Air CD Pro's current operation. From top
to bottom, this column includes the following icons:
•
Stereo Symbol: This will illuminate when the radio is set to stereo.
•
Play Symbol: This will be solidly lit when a CD is playing, flash while a CD is paused, and
turn off when a CD is stopped.
•
Repeat Symbol: This will be solidly lit when a CD is set to Repeat All, flash when a CD is set
to Repeat One, and turn off when Repeat is deactivated.
•
Aux Icon: This will illuminate when Aux Mode is selected.
•
CD Icon: This will illuminate when CD Mode is selected.
•
Prog Icon: In Radio Mode, this will illuminate while saving a preset station. In CD Mode, this
will be solidly lit after a custom playlist is programmed, flash while a custom playlist is in the
process of being programmed, and turn off when there is no custom playlist.
4. Tune Knob: Rotate this knob to manually change the radio station number.
5. Volume Knob: Rotate this knob to adjust the Air CD Pro's volume (shown on the Display as 00–
30).
6. Headphone Output: Connect headphones to this 1/8" / 3.5 mm output if you would like to listen
to Air CD Pro through the headphones.
7. Aux In: If you would like to listen to an auxiliary device (such as an iPod or other MP3 player)
through Air CD Pro, use a cable with a standard 1/8" / 3.5 mm connector to plug the device into
this input. See Listening to an Auxiliary Device
8. Internal Speakers: These speakers produce Air CD Pro's audio output.

Rear Panel

1. Antenna: When listening to the radio, adjust the Antenna for better reception as needed. When
not using the antenna, keep it as pictured in the diagram above. See
using the Antenna.
2. Power Input: To power Air CD Pro, connect the included power adapter from this port to a
power outlet. To turn off the unit, unplug the power adapter from the port or the power outlet.
Note: Powering off Air CD Pro will reset the clock that displays when the unit is in standby.
6
for more information.
1
2
Setup for more details on