Time/Date; Brightness; Language - SOUNDMASTER highLine Manual De Instrucciones


WLAN region
Select the WLAN region to obtain the optimal WLAN connectivity: Europe or
Australia.

Manual settings
Choose wireless network connection and enable or disable DHCP (Dynamic Host
Configuration Protocol).

Network profile
ICD2020 remembers the last four wireless networks it has connected to, and
automatically tries to connect to whichever one of them it can find. From here you
can see the list of registered networks. You can delete unwanted networks by turning
and pressing then choosing YES to confirm delete.

Keep network connected
If you choose to keep network connected, the WiFi will not
disconnect even you are in standby mode. Otherwise, the
connection will only available in internet radio and music
player modes. This option allows ICD2020 to be ready for
DLNA streaming in any operating modes.
When Keep network connected is selected the standby
power consumption is raised.
Set the time manually or automatically update, time format, time zone and daylight.
You may change the backlight of each environment (Normal or standby) to High, Medium High,
Medium, Medium Low, Low or Off
Change it as your preference.

TIME/DATE

BRIGHTNESS

LANGUAGE

9
ICD2020 / English Instruction Manual