To Re-Activate Channel Control Lock; Using The Master Power Key - COX M7820 Guía Del Usario

To Re-Activate Channel Control Lock:

1.
2.
3.
4.

USING THE MASTER POWER KEY

The Cox Universal Remote Control is equipped with a
unique feature that allows you to sequentially turn on
or off all your home entertainment devices with a single
key press as follows:
1.
2.
M7820BP1.indd 15
On the remote control, press CABLE once.
Then press and hold SETUP until the
CABLE key blinks twice, then release SETUP.
Enter 9 - 7 - 3. The CABLE key will blink
twice.
Press CH+ once. The CABLE key will blink
twice.
Now, regardless of what mode you select
(that is, TV, DVD, or CABLE), only the chan-
nel control capability of your cable converter
will be accessible.
NOTE: This feature does not affect the AUX
mode.
Point the remote control at the devices.
Press and hold MASTER POWER for 3 seconds
to sequentially turn on or off all home
entertainment devices.
Depending on what mode is currently
selected, the remote control will send IR com-
mands to the devices in the following order
Start Mode Device On/Off
AUX
Cable, TV, DVD
DVD Auxiliary, Cable, TV CABLE
TV DVD, Auxiliary, Cable CABLE
CABLE TV, DVD, Auxiliary
For example, if TV is selected, pressing and
holding MASTER POWER for 3 seconds will
turn off the DVD, an auxiliary device, and the
cable converter.
15
End Mode
CABLE
CABLE
3/13/2007 3:54:00 PM