Resetting The Circuit Breaker - Opex OMATION Envelopener 410 Serie Manual Del Operador

4.3.4. Resetting the circuit breaker

1. If the machine has no display and is plugged in and turned on, check the
circuit breaker on the back of the machine. The breaker shown has been
tripped and is open (Figure 4-21).
2. Unplug the power cord and push the circuit breaker toward the machine to
close it (Figure 4-22).
Circuit Breaker Open
Push
Operation
OMATION® Series 410 Envelopener™ Operator Manual
If there is white
showing, the circuit
breaker is open
Figure 4-21: Open circuit breaker
Figure 4-22: Closing the circuit breaker
OPEX Corporation
Circuit Breaker Closed
51