Care & Maintenance - Mi 3H Manual De Usuario

Care & Maintenance
Make sure the purifier is turned off and unplugged.
Cleaning the filter compartment
Use a vacuum cleaner or a soft cloth
to remove any dust from the air
inlets or the filter compartment, so
as to ensure optimal ventilation and
purification.
Cleaning the laser particle sensor
The latch of the particle sensor's
cover is located just above the inside
of the filter compartment. Remove
the cover, by pushing a finger up
against the latch (as shown in
Illustration A).
Use an air blow gun or a hair dryer to
clean the cover and the sensor (as
shown in Illustration B).
Note: Do not use hot air.
7
Illustration A
Illustration B