Ferroli SUN P7 Instrucciones De Uso página 39

SUN P7
Preset (factory-set) weekly programme
06:30
12:00
16:30
The weekly programme is preset with 3 ON time bands and 3 OFF time bands: equal for each day of
the week. In the request time band, the display (detail 7 - fig. 1) shows the ON icon.
Important: Check burner operation methods, par. 3.1
Weekly programme modification
1. Press the Programming button "P" (detail 5 - fig. 1)
2. Select the day to be programmed with the + and - buttons (details 4 and 6 - fig. 1):
• Day 1 and Radiator flash: Monday heating programming
• Day 2 and Radiator flash: Tuesday heating programming
• Day 3 and Radiator flash: Wednesday heating programming
• Day 4 and Radiator flash: Thursday heating programming
• Day 5 and Radiator flash: Friday heating programming
• Day 6 and Radiator flash: Saturday heating programming
• Day 7 and Radiator flash: Sunday heating programming
• Day 15 and Radiator flash: heating programming period Monday - Friday
• Day 67 and Radiator flash: heating programming period Saturday - Sunday
• Day 16 and Radiator flash: heating programming period Monday - Saturday
• Day 17 and Radiator flash: heating programming period Monday - Sunday
• Day 17 and Radiator flash: not used
3. Press the Programming button "P" (detail 5 - fig. 1):
4. 06:30 and Radiator flash, ON, 1
4.1 Use the + and - buttons (details 4 and 6 fig. 1) to modify the start of the 1st ON time band; example 06:00
Press the Programming button "P" (detail 5 - fig. 1)
5. 08:30 and Radiator flash, 2
5.1 Use the + and - buttons (details 4 and 6 fig. 1) to modify the start of the 1st OFF time band; example 09:00
Press the Programming button "P" (detail 5 - fig. 1)
6. 12:00 and Radiator flash, ON, 3
6.1 Use the + and - buttons (details 4 and 6 fig. 1) to modify the start of the 2nd ON time band; example 12:30
Press the Programming button "P" (detail 5 - fig. 1)
7. 12:00 and Radiator flash, 4
7.1 Use the + and - buttons (details 4 and 6 fig. 1) to modify the start of the 2nd OFF time band; example 14:00
Press the Programming button "P" (detail 5 - fig. 1)
8. 16:30 and Radiator flash, ON, 5
8.1 Use the + and - buttons (details 4 and 6 fig. 1) to modify the start of the 3rd ON time band; example 16:00
Press the Programming button "P" (detail 5 - fig. 1)
9. 22:30 and Radiator flash, 6
9.1 Use the + and - buttons (details 4 and 6 fig. 1) to modify the start of the 3rd OFF time band; example 23:30
Press the Programming button "P" (detail 5 - fig. 1)
10. By repeating the above procedure it is possible to programme the 4th ON time band and the 4th OFF
time band.
11. Press the Programming button "P" (detail 5 - fig. 1) for 3 seconds to exit the programming mode.
EN
- 08:30
- 12:00
- 22:30
Cod. 3540I810 - 03/2009 (Rev. 00)
39