Engine Preparation
• Save all instructions
B
Fuel
WARNING
• Gasoline is extremely flammable and vapors can
explode if ignited. Handle with care.
Use fresh, clean, regular-unleaded gasoline with a
minimum of 87 Octane. Do NOT use leaded gasoline,
gasohol, methanol, or diesel fuel. Do NOT mix oil with
gasoline. Do NOT allow gasoline to become contaminated
with dust, water, or debris.
NOTICE
Using incorrect fuel type or contaminated fuel will cause
serious engine damage.
NOTE: Fuel tank capacity is approximately 1.4 qt. US (1.3 L).
HOW TO FILL ENGINE WITH FUEL
WARNING
• Turn engine off and let engine cool for several minutes
before removing the fuel cap or adding fuel.
• Never fill fuel tank indoors.
• Do not smoke while adding fuel.
1. Clean surface around fuel tank cap to prevent
contaminations. Refer to Figure 11 for location of fuel cap.
2. Loosen fuel cap slowly to remove.
3. Pour fuel into the tank. Use care to avoid spillage.
WARNING
Do NOT OVERFILL fuel. Allow space for the fuel to expand
due to heat from engine and/or sun.
4. Before replacing the fuel cap, inspect and clean the fuel
cap seal.
5. Replace the fuel cap and securely hand-tighten.
6. Clean up any spilled fuel.
Questions? Call Toll Free at 1-800-737-2112
(Continued)
EN - 10
Fuel Tank Cap
Copyright © 2018 MAT Engine Technologies, LLC
Figure 11
Oil Fill Cap/Dipstick