Lacava ELEGANZA 1810 Manual Del Propietário página 5

6. Attach the vertical pop-up control rod to the
connector by sliding it through its designated hole and
tightening the screw to keep it in place.
7. Remove the gray plastic cap from the drain body and
then place the horizontal control rod into the opening
so that the plastic ball and gasket fit inside. Then slide
the plastic cap over the rod and tighten back into
place.
8. Attach the horizontal control rod to the appropriate
height on the connector.
9. Attach the supply lines to the water supply and check
for leaks.
5 LACAVA LLC