Chart Industries Caire Eclipse autoSAT PAOS Manual Del Usuario página 6

4
Select Flow Delivery Mode
Flow Mode Button and Indicator
Press the Flow Mode button to select your desired flow mode.
Pressing this button repeatedly will toggle you back and forth
between continuous flow and pulse dose modes. In Continuous
Flow Mode the oxygen is provided at a constant flow rate
between 0.5 and 3.0 LPM. In Pulse Dose Mode, oxygen is
supplied in a bolus at the beginning of each inspiration, providing
a selectable range of settings 1-9 with bolus sizes 16-192 mL.
Pulse Dose can be adjusted for sensitivity and breath bolus
delivery. Flow settings in both modes should be prescribed for
you by your physician.
5
Adjust Flow Setting to Prescribed Level
Increase or Decrease Flow Setting Button
Using the + or - buttons, adjust the setting to the prescription
supplied by your physician.
Continuous Flow Mode Display
Pulse Dose Mode Display
WARNING: IT IS vERY IMPORTANT TO SELECT ONLY THE PRE-
SCRIBED LEvEL OF OXYGEN. DO NOT CHANGE THE FLOW
SELECTION UNLESS YOU HAvE BEEN DIRECTED TO DO SO
BY A LICENSED CLINICIAN. THE PORTABLE OXYGEN CONCENTRATOR
MAY BE USED DURING SLEEP UNDER THE RECOMMENDATION OF A
qUALIFIED CLINICIAN.
6 — 20626704-C1 D (English)
6
Begin Using the Eclipse
Air Inlet Filter
Your unit is equipped with an Air Inlet Filter (extra filter
provided). Check daily and clean once a week.
Connect the oxygen supply tubing
to the oxygen outlet and connect the
oxygen cannula per the instructions
provided with the cannula, or per the
instructions from your home care
provider.
Breathe normally through the nasal cannula.
When operating on battery power, utilizing the Pulse Dose Mode
will achieve longer duration-of-use.
7
Universal Cart Operation
Align the locater holes on the bottom of the device to the tabs on
the Universal Cart. Align the large threaded screw to the insert at
the back of the Eclipse. Then hand-tighten the knob on the cart
until the Universal Cart is tightly secured to the device. Depress
the push-button on the telescoping Universal Cart handle to
adjust the height of the handle.