TFA_No_98.1087_Anl_09/10
Radio controlled alarm clock with thermometer
• To activate or deactivate the alarm function press "ALARM"
button.
,
,
the LCD.
• Once the alarm starts to ring, you can stop the alarm by
pressing "ALARM" button.
• You can activate the snooze function by pressing the "LIGHT/
SNOOZE" button on the top. Zz appears and the alarm will be
interrupted for 4 minutes.
4.6 Dual time setting
• Select dual time by "MODE" button.
• Hold "MODE" button for 3 seconds. The hour digits are flas-
hing. Press "▼" or "▲" button to adjust the time. Confirm
with "MODE" button. Set minutes in the same way. Confirm
with "MODE" button.
5. Backlight
• Press "LIGHT/SNOOZE" button. The backlight will light for 5 sec.
6. Battery replacement
• Replace the batteries when the display becomes weak.
18
09.09.2010
14:06 Uhr
+
or no alarm symbol is shown on
Seite 10
Radio controlled alarm clock with thermometer
• Use 2 x 1,5 V AAA alkaline batteries. Observe correct polarity.
Low batteries should be changed soon to avoid the damage
resulting from a leaking battery.
• Attention: Please do not dispose of old electronic devices and
used batteries in household waste. To protect the environment,
take them to your retail store or to nearest civic amenity site to
be disposed of according to national or local regulations.
7. Notes
• Always read the users manual carefully before operating the unit.
• Avoid placing the clock near interference sources/metal fra-
mes such as computer or TV sets.
• Do not expose the instrument to extreme temperatures, vibra-
tion or shock.
8. Intended usage, exclusion of warranty, safety infor-
mation
• The product is not a toy. Keep it out of reach of children.
• The product is not to be used for medical purpose or for
public information, but is determined for home use only.
• Improper use or unauthorized opening of housing will mean
the loss of warranty.
19