Double Loop - Petsafe PIG19 Manual De Funcionamiento Y De Adiestramiento

Sample 2 (2E): Perimeter Loop Using Existing Fence (Single Loop)
This layout allows you to include your existing fence as part of your layout and keep your pet
from jumping out or digging under your existing fence. It reduces the amount of wire which
will need to be buried. From the Fence Transmitter, run the wire to A, A to B, B to C, C to
D, D to E, E to A, twist the wires from A back to the Fence Transmitter. See the "Install the
Boundary Wire" section for more information on attaching the wire to a fence.

Double Loop

A Double Loop must be used when you are not establishing the Boundary Zone on all sides of your property.
When using a Double Loop, the Boundary Wire must be separated by a minimum of 1.5 m to avoid cancelling the signal.
Remember that a Double Loop will require twice as much wire.
Sample 3 (2F): Front or Back Property Only
(Double Loop)
From the Fence Transmitter, run the wire to A, A to B, B to
C, C to D, D to E, E to F, make a U-turn and follow your
path all the way back to A, keeping the wire separated
1.5 m. Twist the wire from A back to the Fence Transmitter.
Sample 4 (2G): Front Boundary Only
(Double Loop)
From the Fence Transmitter, run the wire to A, A to B,
B back to A keeping the wire separated 1.5 m. Twist
the wire from A back to the Fence Transmitter.
Sample 5 (2H): Lake Access (Double Loop)
From the Fence Transmitter, run the wire to A, A to
B, make a U-turn and go to C, C to D, D to E, make
a U-turn and follow your path all the way back to A
keeping wire separated 1.5 m. Twist the wire from A
back to the Fence Transmitter.
Sample 6 (2I): Wire Loop Attached to Existing Fence (Double Loop)
This layout allows you to include your existing fence as part of your layout and keep your
pet from jumping out or digging under your existing fence. It reduces the amount of wire
which will need to be buried. Run the wire from the Fence Transmitter to A, A to B, B to C,
C to D, D to E, E to F, make a U-turn and follow your path all the way back to A, keeping
the wire separated 1.5 m. Twist the wire from A back to the Fence Transmitter. See the
"Install the Boundary Wire" section for more information on attaching the wire to a fence.
2F
1.5 m
C
A
B
2G
1.5 m
A
www.petsafe.net
2E
B
A
E
D
A
E
B
F
C
2H
B
A
B
C
2I
1.5 m
C
A
B
C
D
E
F
D
1.5 m
E
1.5 m
D
D
E
F
9