Honeywell HRD 80 Manual De Instrucciones página 29

4. Assigning button 1 of the remote control (example)
Press button 1 of the remote control until the LED flashes red and
►
green.
The remote control is ready for binding for 15 seconds.
Guide front end of remote con-
►
trol along with the illuminated
LED of the Hometronic Man-
ager.
The remote control and Homet-
ronic Manager exchange data.
The procedure lasts a few sec-
onds.
The procedure should not be carried out in direct sunlight.
Darken the room if necessary.
Button assignment
27