Cleaning And Maintenance - Corby 3300 Manual Del Usuario

CLEANING AND MAINTENANCE

When cleaning, or storing away, always pull out the plug from the socket outlet.
Never yank the cord to disconnect from the outlet, instead grasp the plug and pull to
disconnect.
Always allow the product to cool completely before cleaning.
The inside of the front-board may be wiped with a dry cloth, but no polish or cleaner
should be used on the inner front-board or heating pad surface.
You will extend the life of the heating pad if you take care not to leave the press
switched on with the front-board open.
Check the appliance and the supply cord for damage regularly. This appliance is
NOT user serviceable. If the supply cord becomes damaged, it must be replaced by
a suitably qualified person using the same rated cable.
1 5