Safety Instructions; Remaining Risks - Zipper ZI-FKS315 Manual De Instrucciones

Ocultar thumbs Ver también para ZI-FKS315:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Saw table
1
Saw blade guard
2
Sliding table
3
Saw blade
4
Splitter
5
Longitudinal fence
6
Always be focused when working, take
Cross fence
7
care to maintain a safe posture at
every time.
Cutting depth adjustment
8
Angle setting
9
Always use the fence and the sliding
stick!
ON/OFF switch
11
Clamping screw
12
Don't work with your machine outdoors
or in a wet area.
Extractor hose
13
Dust collector plug
14
Slipping/ stumbling/ falling down are a
frequent cause of severe injuries.
Wheels
15
Handles
16
Chip box
17
Legs
18
Table lock
19
Mounting
23
Rubber feet
25
Hook for tool
28
Mounting for extractor hose
29
Components
2.3

SAFETY INSTRUCTIONS

2.4
The ZIPPER Tischkreissäge ZI-FKS315 shall be
used only for cutting of wood.
ZIPPER MASCHINEN cannot be held responsible
for any injuries or damages if there was per-
formed manipulation or adjustments to the ma-
chine.
Before doing some works of mainten-
ance, you have to disconnect the ma-
chine from the electrical net!
Do not operate the machine at insuffi-
cient lighting conditions.
Do not operate the machine outdoors.
Do not operate the machine when you
are tired, when your concentration is
impaired, and/ or under the influence
of drugs, medication or alcohol.
The machine shall be used only by
trained persons.
Non
authorized
children, shall be kept away from the
working area.
Do not wear loose clothing, long hair
openly or loose jeweler like necklaces
etc. when operating the machine
They might be catched by rotating
parts and cause serious injuries.

2.4.1 Remaining risks

Even if you abide by all the safety regulations
you'll have to attend following remaining risks:
Danger of injury for the hands/fingers
from the rotating saw blade during the op-
eration.
Danger
of
voltage-carrying parts.
Danger of injury through break or spin-
Use proper safety clothing and devices
when operating the machine (safety
goggles, ear protectors, safety shoes
...)! Do not use safety gloves!
ning out of the saw blade or parts of it.
Hearing damage, when the operator
didn't protect his ears.
persons,
especially
injury
at
contact
with

Publicidad

Tabla de contenido
loading

Tabla de contenido