Alarm Mode - Velleman SW2 Manual Del Usuario

4.3 Time/Calendar Mode
Press A three times to activate this mode and make the digits for the
seconds flash. The various digits will start to flash in a fixed order
when C is pressed any number of times to select certain digits. The
digits for the seconds will start to flash first, followed by those for the
minutes, the hours, the date, the month and the day of the week.
Press B to reset the seconds. Press C to select the digits for the
minutes, hours, etc. and use B to modify them.
Press A to return to the normal display mode.
4.4

Alarm Mode

Press A twice to activate this mode and make the digits for the hours
flash. Use B to enter the hours. Press C to confirm the hours and make
the digits for the minutes flash. Enter the minutes with B and press A to
return to the normal display mode.
4.5 How to Activate/Deactivate the Hour Chime
Hold button C in the normal display mode in order to display the current
alarm time. Press A to make the marks above the days of the week
appear or disappear. The marks above the days of the week indicate
that the hour chime is activated.
4.6 How to Use the Snooze Function
Press B to stop the alarm when it goes off. The alarm will be
reactivated some 5 minutes later.
4.7 How to Deactivate the Snooze Function
Press C to stop the alarm when it goes off. The alarm and the snooze
function will both be permanently deactivated.
The same result is achieved if no button is pressed for a full minute
while the alarm is sounding.
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual,
please visit our website www.velleman.eu. The information in
this manual is subject to change without prior notice.
V. 03 – 15/01/2018
SW2
5 ©Velleman nv