Knick IsoTrans B 48 Manual De Instrucciones página 15

2. Application
®
IsoTrans B 48 isolating terminals can be used for
the galvanic isolation of standard 0(4) to 20 mA
signals. They are supplied by the measured signal
and require no additional auxiliary supply.
The measured signal is transmitted in a ratio of 1:1.
The connection is made through tension clamp
terminals.
3. Mounting
®
IsoTrans B 48 isolating terminals can be mounted
on standard TS 35 rails.
Refer to the following sections for individual
mounting steps.
15