Foster SOLO Instrucciones De Uso Y Mantenimiento página 7

0Man136 Man.Solo Foster 05-2001.qxd
5.1 SETTING ROOM TEMPERATURE
Programming room temperature:
- Connect unit to mains power. The display reads OFF.
To set the desired room temperature press the SET ( 6 ) key for more than 3 seconds.
The green led will light and the previous set temperature will be displayed.
To change the value press:
(8) to increase temperature
(7) to decrease temperature
Press the SET key or wait 5 seconds to return to the actual room temperature.
07/04/03 16.26
6) SET/ESC key: Pressed for 3 seconds, the led is lit and setting of requi-
red room temperature is enabled. During programming it is used
to pass from a sub menu to an upper one.
7) DOWN/ROOM LIGHT key: During programming mode or setting of
room temperature it serves to reduce the displayed value. At
other times it serves to control the room light.
8) Defrost/UP key: By pressing for more than 4 seconds it activates a
manual defrost. During programming mode or setting of room
temperature it serves to increase the displayed value.
9) ON/OFF key: To turn ON or OFF the unit hold pressed for more than 3
seconds.
10) ENTER key: Permits access to programming menu and passage to
the sub menu. It is advisable not to enter programming mode
except in case of necessity and in the presence of a qualified
technician.
n°7
Pagina 7
GB
I
F
D
E