BEEM - Elements of Lifestyle
Housing (Fig. A1)
1. Wipe the inside and outside of the
housing with a damp cloth. If necessary, use
commercially-available washing-up liquid.
To make cleaning the interior easier, you
can hang the grilling grate out (fig. A1).
Baking tray
1. Clean the
baking
water.
2. For tough grime, soak the baking tray in
warm water.
3. Dry the baking tray thoroughly before
inserting it.
NOTE
►
Do not use metal/scouring pads to
clean the appliance.
►
Do not use oven spray to clean the
inside.
►
The baking sheet is NOT dishwasher
safe.
Emptying the crumb tray
(Fig. B1, B2)
1. Let the appliance cool off.
2. Gently tilt the appliance backwards.
3. Slide the lever on the bottom backwards
and flip open the crumb tray.
4. Wipe the crumb tray out with a moist
cloth and wipe it dry.
5. To close the crumb tray, slide the lever
backwards until the crumb tray snaps in.
Storage
If you do not intend to use the appliance for
a longer period of time, clean it as described
in the section Cleaning and maintenance.
Store the appliance and all accessory parts
at a dry, clean and frost-free location which
is protected against direct sunlight.
tray with warm rinse
General
Warranty / Guarantee
In addition to the statutory warranty ob-
ligation, BEEM also grants an extended
manufacturer's guarantee for some products.
Provided this is granted, the corresponding
details for each product can be found either
on the product-specific packaging, advertising
material or from BEEM customer service.
This does not infringe the warranty disclaimer.
Please contact your supplier if you have any
questions on guarantee conditions, ordering
accessories or service handling outside of
Germany.
Limitation of liability
We assume no liability for damage or follow-
up damage in the case of:
■
failure to follow the instructions,
■
use for other than the intended purpose,
■
improper or unsuitable handling,
■
improperly performed repairs,
■
unauthorized alterations,
■
the use of third-party components and/or
replacement parts,
■
the use of unsuitable auxiliary parts or
accessories.
Declaration of Conformity
BEEM hereby declares that this appliance
complies with the fundamental requirements
and other relevant provisions of 2014/35/
EU, 2014/30/EU, 2009/125/EC and
2011/65/EU directives.
EN 13