Loading For Peel Mode - Avery Dennison Pathfinder 6057 Referencia Rápida

Loading for Peel Mode

1. Peel and discard the first four inches of labels from the
backing paper.
2. Hold the printer upright and gently press down on the label
deflector.
3. Feed the supply through the opening at the base of the label
deflector.
4. Close the cover completely.
5. Hold the backing paper and
push the label deflector up until
it snaps into place.
6. Touch the Home key on the
display, then select Load
Supply, Calibrate Stock.
4-EN
Label
Deflector